Home » Samsung Manuals » Multifunction Devices » Samsung CLX 6210FX » Manual Viewer

Samsung CLX 6210FX User Manual (ENGLISH) - Page 95

Configuring basic network settings, Selecting the authentication type, Setting Encryption, Shared Key

UPC - 635753721072

Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

4. Align the connector on the wireless network interface card with the connector on the control board. Push the card firmly into the connector on the control board until it is completely and securely in place. 1 Connector 2 Wireless network interface card 5. Replace the control board cover and fasten the cover with the screws. 6. Replace the rear cover and fasten the cover with the screw. 7. Reconnect the power cord and printer cable, and turn the machine on. For information about configuring and using the printer on a wireless network environment, refer to the user's guide provided with the wireless network interface card. You can also configure the network parameters on the control panel; see the next column. Configuring basic network settings After installing the wireless network card, you must configure the appropriate network parameters to use your printer in a wireless network. To do this, you can use both control panel and SyncThru Web Service, an embedded web site of your printer. This section gives you basic information on 802.11b/g network parameters which can be configured from the control panel. You can configure basic wireless settings, such as SSID, Operation Mode, and channels. You can retrieve basic settings by selecting a wireless network or manually configure them as you need. 1. Press Menu ( ) until Network appears on the bottom line of the display and press OK. 2. Press the left/right arrow until Wireless appears and press OK. 3. Press OK when WLAN Basic appears. 4. Press the left/right arrow to select the setup method you want and press OK. • Search List: The wireless network interface card on your printer searches for wireless networks in the area and shows the results. • Custom: You can configure the wireless settings according to your needs. 5. If you selected Search List, press the left/right arrow to select a network and press OK. If you selected Custom, set each network options: • Edit SSID: Enter the SSID, the name that identifies a wireless network. SSID is case-sensitive so you need to enter it. • Operation Mode: Select the type of wireless connections. In Ad-Hoc mode, wireless cards communicate directly each other. In Infrastructure mode, network cards communicate with each other through an access point, which allows both wireless and cabled cards to send files to the printer. In Ad-Hoc mode, even if the network cable is connected, your printer will use the wireless interface. • Channel: This option is available only in the Ad-Hoc mode. In most cases, you will not need to change this setting. The printer will scan all available channels for the specified network and will adapt its channel to the one detected. 6. When you have finished, press Stop/Clear to return to ready mode. Selecting the authentication type Authentication is a process of identifying the legitimacy of an user to access a network. You can select whether or not authentication is used. 1. Press Menu ( ) until Network appears on the bottom line of the display and press OK. 2. Press the left/right arrow until Wireless appears and press OK. 3. Press the left/right arrow until WLAN Security appears and press OK. 4. Press the left/right arrow until Static WEP appears and press OK. 5. Press the left/right arrow until Authentication appears and press OK. 6. Press the left/right arrow to select the type you want. • Open System: Authentication is not used. • Shared Key: Authentication is used. 7. Press OK to save your selection. 8. Press Stop/Clear to return to ready mode. Setting Encryption If your network uses WEP encryption keys, you can must select the appropriate encryption type and configure encryption keys. You can configure up to four keys. The active key must match the key value and key position (for example, Key 1) configured on other wireless devices in the network. 1. Press Menu ( ) until Network appears on the bottom line of the display and press OK. 2. Press the left/right arrow until Wireless appears and press OK. 3. Press the left/right arrow until WLAN Security appears and press OK. 4. Press the left/right arrow until Static WEP appears and press OK. 5. Press the left/right arrow until Encryption appears and press OK. If you have set the authentication type to Open System, the Encryption menu does not display. 6. Set each encryption option and press OK. • Encrypt. Type: Select an encryption type: None, 64-bit WEP, or 128-bit WEP. • Key Type: Select the key type of your network. • Using Key: Select the key to be used in your network. • Edit Key: Enter the key number for the selected key position. Installing accessories_ 95

Section	Page
Features of your new laser product	2
Safety information	5
Contents	14
Introduction	19
Printer overview	19
Front view	19
Rear view	19
Control panel overview	20
CLX-6200FX, CLX-6210FX, CLX-6240FX only	20
CLX-6200ND only	21
Understanding the Status LED	22
Acknowledging the status of the toner cartridge	22
Menu overview	23
Supplied software	24
Printer driver features	24
Printer driver	24
PostScript driver	24
Getting started	25
Setting up the hardware	25
Printing a demo page	25
Setting up the network	25
Supported operating environments	25
Configuring network protocol via the machine	26
Using the SetIP program	26
System requirements	26
Windows	26
Macintosh	26
Linux	27
Installing the software	27
Machine's basic settings	28
Altitude adjustment	28
Changing the display language	28
Setting the date and time	29
Changing the clock mode	29
Changing the default mode	29
Setting sounds	29
Entering characters using the number keypad	29
Using the save modes	30
Setting print job timeout	30
Auto continue	30
Net accounting	30
Changing the font setting	31
Loading originals and print media	32
Loading originals	32
On the scanner glass	32
In the DADF (or ADF)	32
Selecting print media	33
Specifications on print media	34
Media sizes supported in each mode	35
Guidelines for special print media	35
Changing the size of the paper in the paper tray	36
Loading paper	36
Loading paper in the tray 1 or optional tray	36
Loading paper in the multi-purpose tray	37
Adjusting the output support	38
For Letter-sized paper	38
For A4- or Legal-sized paper	38
Setting the paper size and type	38
Copying	39
Selecting the paper tray	39
Copying	39
Changing the settings for each copy	39
Darkness	39
Original Type	39
Reduced or enlarged copy	39
Changing the scan size settings	40
Changing the default copy settings	40
ID card copying	40
Using special copy features	40
Collation	40
2-up or 4-up copying	40
Poster copying	41
Clone copying	41
Adjusting background images	41
Book copying	41
Margin shift	41
Edge erase	42
Gray enhance copying	42
Printing on both sides of paper	42
Setting copy timeout	42
Scanning	44
Scanning basics	44
Scanning from the control panel	44
Setting scan information in Samsung Scan Manager.	44
Scanning to application programs	44
Scanning by a network connection	45
Preparing for network scanning	45
Scanning to Email	46
Scanning to an FTP server	47
Scanning to an SMB server	47
Changing the settings for each scan job	47
Changing the default scan settings	47
printing scan confirmation report automatically	47
Setting up Address Book	48
Registering speed email numbers	48
Configuring group email numbers	48
Retrieving global email addresses from the LDAP server	48
Using Address Book entries	48
Searching Address Book for an entry	48
Printing Address Book	49
Scan on both sides of paper	49
Basic printing	50
Printing a document	50
Canceling a print job	50
Faxing	51
Sending a fax	51
Setting the fax header	51
Adjusting the document settings	51
Sending a fax automatically	52
Sending a fax manually	52
Confirming a transmission	52
Automatic redialing	52
Redialing the last number	52
Sending faxes on both sides of paper	52
Receiving a fax	52
Selecting the paper tray	52
Changing receiving modes	52
Receiving automatically in Fax mode	53
Receiving manually in Tel mode	53
Receiving manually using an extension telephone	53
Receiving automatically in Ans/Fax mode	53
Receiving faxes using DRPD mode	53
Receiving in secure receiving mode	53
Activating secure receiving mode	53
Receiving faxes in memory	54
Other ways to fax	54
Sending a fax to multiple destinations	54
Sending a delayed fax	54
Sending a priority fax	55
Forwarding faxes	55
Fax setup	56
Changing the fax setup options	56
Changing the default document settings	57
Printing sent fax report automatically	57
Setting up Address Book	57
Using USB flash memory	59
About USB memory	59
Plugging in a USB memory device	59
Scanning to a USB memory device	59
Scanning	59
Customizing Scan to USB	60
Printing from a USB memory device	60
To print a document from a USB memory device:	60
Backing up data	60
Backing up data	60
Restoring data	60
Managing USB memory	61
Deleting an image file	61
Formatting a USB memory device	61
Viewing the USB memory status	61
Maintenance	62
Printing reports	62
Printing a report	62
Adjusting the color contrast	62
Clearing memory	63
Cleaning your machine	63
Cleaning the outside	63
Cleaning the inside	63
Cleaning the scan unit	65
Maintaining the cartridge	65
Toner cartridge storage	65
Handling instructions	65
Use of Non-Samsung and refilled toner cartridge	65
Estimated cartridge life	65
Redistributing toner	66
Replacing the toner cartridge	66
Clearing the Toner Empty message	67
Replacing the paper transfer belt	68
Maintenance parts	69
Checking replaceables	69
Replacing the DADF (or ADF) rubber pad	69
Managing your machine from the website	70
To access SyncThru™ Web Service:	70
Checking the machine’s serial number	70
Troubleshooting	71
Tips for avoiding paper jams	71
Clearing document jams	71
Input Misfeed	71
Exit misfeed	72
Roller misfeed	72
Clearing paper jams	73
In the paper feed area	73
In the multi-purpose tray	74
In the fuser unit area	75
In the paper exit area	76
In the optional tray	77
Understanding display messages	78
Solving other problems	81
Paper feeding	81
Printing problems	82
Printing quality problems	83
Copying problems	85
Scanning problems	86
Samsung Scan Manager problems	86
Fax problems	86
Common PostScript problems	87
Common Windows problems	87
Common Linux problems	88
Common Macintosh problems	90
Ordering supplies and accessories	91
Supplies	91
Accessories	91
How to purchase	92
Installing accessories	93
Precautions to take when installing accessories	93
Upgrading a memory module	93
Installing a memory module	93
Activating the added memory in the PS printer properties	94
Using a wireless network interface card	94
Installing a wireless network interface card	94
Configuring basic network settings	95
Selecting the authentication type	95
Setting Encryption	95
Restoring default values for wireless networking	96
Using the hard disk	96
Installing the hard disk	96
Setting the hard disk in the printer properties	97
Printing with the optional hard disk	97
File Policy	98
Deleting residual image data	98
Specifications	99
General specifications	99
Printer specifications	100
Scanner specifications	100
Copier specifications	100
Facsimile specifications	101
Glossary	102
Index	106
Contact SAMSUNG worldwide	108
Software section	112
Software section Contents	113
Installing Printer Software in Windows	117
Installing Printer Software	117
Installing Software for Local Printing	117
Installing Software for Network Printing	120
Reinstalling Printer Software	123
Removing Printer Software	124
Installing mono printer driver	124
Basic Printing	126
Printing a Document	126
Printing to a file (PRN)	126
Printer Settings	127
Layout Tab	127
Paper Tab	128
Graphics Tab	129
Extras Tab	129
About Tab	130
Printer Tab	130
Using a Favorite Setting	130
Using Help	130
Advanced Printing	131
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)	131
Printing Posters	132
Printing Booklets	132
Printing on Both Sides of Paper	133
Printing a Reduced or Enlarged Document	133
Fitting Your Document to a Selected Paper Size	133
Using Watermarks	134
Using an Existing Watermark	134
Creating a Watermark	134
Editing a Watermark	134
Deleting a Watermark	134
Using Overlays	135
What is an Overlay?	135
Creating a New Page Overlay	135
Using a Page Overlay	135
Deleting a Page Overlay	135
Using Windows PostScript Driver	136
Advanced	136
Using Help	136
Using Direct Printing Utility	137
Overview Direct Printing Utility	137
Printing	137
From the Direct Printing Utility window	137
Using the shortcut icon	137
Using the right-click menu	137
Sharing the Printer Locally	138
Setting Up a Host Computer	138
Setting Up a Client Computer	138
Scanning	139
Scanning Using Samsung SmarThru Office	139
Using Samsung SmarThru Office	139
Uninstalling Samsung SmarThru Office	141
Using Onscreen Help File	141
Scanning Process with TWAIN- enabled Software	141
Scanning Using the WIA Driver	141
Windows XP	141
Windows Vista	141
Using Smart Panel	142
Understanding Smart Panel	142
Opening the Troubleshooting Guide	143
Using Printer Settings Utility	143
Using Onscreen Help File	143
Changing the Smart Panel Program Settings	143
Using Your Printer in Linux	144
Getting Started	144
Installing the Unified Linux Driver	144
Installing the Unified Linux Driver	144
Uninstalling the Unified Linux Driver	145
Using SetIP program	146
Starting the program	146
Using the Unified Driver Configurator	146
Opening the Unified Driver Configurator	146
Printers Configuration	147
Scanners Configuration	148
Ports Configuration	148
Configuring Printer Properties	149
Printing a Document	149
Printing from Applications	149
Printing Files	150
Scanning a Document	150
Using the Image Manager	151
Using Your Printer with a Macintosh	153
Installing Software	153
Uninstalling software	153
Using SetIP program	154
Setting Up the Printer	154
For a Network-connected Macintosh	154
For a USB-connected	155
Printing	156
Printing a Document	156
Changing Printer Settings	156
Printing Multiple Pages on One Sheet of Paper	158
Scanning	159
Scanning with USB	159
Scanning with network	159
Setting scan information in Scan Manager.	159
Software section Index	160
A	160
B	160
C	160
D	160
E	160
F	160
G	160
H	160
I	160
L	160
M	160
N	160
O	160
P	160
S	161
T	161
U	161

Match case Limit results 1 per page

Installing accessories

_ 95

Align the connector on the wireless network interface card with the

connector on the control board. Push the card firmly into the connector

on the control board until it is completely and securely in place.

Replace the control board cover and fasten the cover with the screws.

Replace the rear cover and fasten the cover with the screw.

Reconnect the power cord and printer cable, and turn the machine on.

Configuring basic network settings

After installing the wireless network card, you must configure the

appropriate network parameters to use your printer in a wireless network.

To do this, you can use both control panel and SyncThru Web Service, an

embedded web site of your printer. This section gives you basic information

on 802.11b/g network parameters which can be configured from the control

panel.

You can configure basic wireless settings, such as SSID, Operation Mode,

and channels. You can retrieve basic settings by selecting a wireless

network or manually configure them as you need.

Press

(

)

until

Network

appears on the bottom line of the

display and press

Press the left/right arrow until

Wireless

appears and press

Press

when

WLAN Basic

appears.

Press the left/right arrow to select the setup method you want and press

•

Search List:

The wireless network interface card on your printer

searches for wireless networks in the area and shows the results.

•

Custom:

You can configure the wireless settings according to your

needs.

If you selected

Search List

, press the left/right arrow to select a network

and press

If you selected

Custom

, set each network options:

•

Edit SSID:

Enter the SSID, the name that identifies a wireless

network. SSID is case-sensitive so you need to enter it.

•

Operation Mode:

Select the type of wireless connections.

Ad-Hoc

mode, wireless cards communicate directly each other.

Infrastructure

mode, network cards communicate with each other

through an access point, which allows both wireless and cabled

cards to send files to the printer.

•

Channel:

This option is available only in the Ad-Hoc mode. In most

cases, you will not need to change this setting. The printer will scan

all available channels for the specified network and will adapt its

channel to the one detected.

When you have finished, press

Stop/Clear

to return to ready mode.

Selecting the authentication type

Authentication is a process of identifying the legitimacy of an user to access

a network. You can select whether or not authentication is used.

Press

(

)

until

Network

appears on the bottom line of the

display and press

Press the left/right arrow until

Wireless

appears and press

Press the left/right arrow until

WLAN Security

appears and press

Press the left/right arrow until

Static WEP

appears and press

Press the left/right arrow until

Authentication

appears and press

Press the left/right arrow to select the type you want.

•

Open System:

Authentication is not used.

•

Shared Key:

Authentication is used.

Press

to save your selection.

Press

Stop/Clear

to return to ready mode.

Setting Encryption

If your network uses WEP encryption keys, you can must select the

appropriate encryption type and configure encryption keys. You can

configure up to four keys. The active key must match the key value and key

position (for example, Key 1) configured on other wireless devices in the

network.

Press

(

)

until

Network

appears on the bottom line of the

display and press

Press the left/right arrow until

Wireless

appears and press

Press the left/right arrow until

WLAN Security

appears and press

Press the left/right arrow until

Static WEP

appears and press

Press the left/right arrow until

Encryption

appears and press

Set each encryption option and press

•

Encrypt. Type:

Select an encryption type:

None

64-bit WEP

, or

128-bit WEP

•

Key Type:

Select the key type of your network.

•

Using Key:

Select the key to be used in your network.

•

Edit Key:

Enter the key number for the selected key position.

Connector

Wireless network

interface card

For information about configuring and using the printer on a wireless

network environment, refer to the user’s guide provided with the

wireless network interface card. You can also configure the network

parameters on the control panel; see the next column.

Ad-Hoc

mode, even if the network cable is connected, your

printer will use the wireless interface.

If you have set the authentication type to

Open System

, the

Encryption

menu does not display.