Samsung HLP5085W User Manual (ENGLISH) - Page 14
Memorizing the Channels, Adding and Erasing Channels, Storing Channels in Memory Automatic Method - service manual
View all Samsung HLP5085W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operation Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding/deleting channels (manual). English - 26 Selecting the Video Signal Source Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or cable system). 1 Press the MENU button. Press the ... or † button to select "Channel", then press the ENTER button. Input Picture Sound Channel Setup Channel Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter Return 2 Press the ... or † button to select "Air/CATV", then press the ENTER button. If you are connected to an antenna, press the ... or † button to select "Air". If you connected cable, press the ... or † button to select the type of cable system: "STD", "HRC" or "IRC". Input Picture Sound Channel Setup Channel Antenna : AntA.1ir Air/CATV : AirSTD Auto Program HRC Add/Delete IRC Favorite Channels Name Fine Tune ▼ More Move Enter Return Press the EXIT button to exit. NOTES • "STD", "HRC" and "IRC" identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory". • Subscription cable services require service-specific requirement for viewing. Storing Channels in Memory (Automatic Method) First, select the correct signal source ("Air", "STD", "HRC" or "IRC") as described on the previous page. 1 Press the MENU button. Press the ... or † button to select "Channel", then press the ENTER button. 2 Press the ... or † button to select "Auto Program", then press the ENTER button. Press the ENTER button to start the auto program. The TV begins memorizing all of the available stations. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. Input Picture Sound Channel Setup Channel Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter Return Auto Program Start Enter Return Adding and Erasing Channels You can add channels that were not memorized or delete unwanted channels from memory. 1 Press the MENU button. Press the ... or † button to select "Channel", then press the ENTER button. 2 Press the ... or † button to select "Add/Delete", then press the ENTER button. Repeatedly pressing the ENTER button will alternate between add channel and delete channel. Press the CH or CH button to switch to the appropriate channel, then repeat above. Press the EXIT button to exit. Input Picture Sound Channel Setup Channel Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter Return Add/Delete Air 12 Not In Memory Add Change Enter Return Alternate method Simply press the ADD/DEL button on the remote control to add or delete channels. English - 27