Samsung HLP5085W User Manual (ENGLISH) - Page 8
Connecting VHF and UHF Antennas, Antennas with 300-ohm Flat Twin Leads
View all Samsung HLP5085W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. 1 Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adapter into the "ANT 1 IN" terminal on the rear panel. Antennas with 75-ohm Round Leads If your antenna looks like this: 1 Plug the antenna lead into the "ANT 1 IN" terminal on the rear panel. it is an antenna with 75-ohm round leads. English - 14 Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the "ANT 1 IN" terminal on the rear panel. English - 15