Samsung LNS2641DX Owners Instructions - Page 10
spiit:er
![]() |
View all Samsung LNS2641DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
IIConnecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box ANT TIN (CABLE) 1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV. ›- Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box hat Descrambles All Channels ANT IN ANT OUT.;. ; 1. Find the cable that is connected to the ANT OUT terminal on your cable box. x- This terminal might be labeled "ANT our, "VHF our or simply, 'our. ANT 2IN (CABLE) 2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.) CLEF ANT IN 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. >. This terminal might be labeled 'ANT IN", "VHF IN' or simply, 'IN". 2. Connect this cable to a two-way splitter. cable Splitt r Incoming cable CIE _=„IfIlIE1**L4M Split or .4/ COI MT Cable Box 3. Connect an RF cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box. Incoming cable spiit:er Cable Box SEE4- RF iA B) Swit 4. Connect an RF cable between the ANT OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch. Incoming cable riff la' Splitt I- IN El 7, 0 \ ::4341 zi.x ?rpm/ ,ICLIN 7 Cable Box RF (A. B) Switch 5. Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (NB) switch. Inconlinp cable Splitter Oa& OW Cable Box IBI I RF (NB) Switch ANT 2 IN (CABLE: ® TV Rear 6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the rear of the TV. After you have made this connection, set theNB switch to the 'A" position for normal viewing. Set theNB switch to the "6" position to view scrambled channels. (When you set theNB switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.) English-8
![](/manual_guide/products/samsung-lns2641dx-owners-instructions-e81b9c6/10.png)