Samsung ML-4551N User Manual (ENGLISH) - Page 55
Solving general printing problems, Samsung ML - ml driver
UPC - 635753624113
View all Samsung ML-4551N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Solving general printing problems For problems with the operation of your printer, refer to the table for suggested solutions. Condition The printer does not print. Possible cause Suggested solutions The printer is not receiving power. Check the power cord connections. Check the power switch and the power source. The printer is not selected as the default printer. Select Samsung ML-4550 Series PCL 6 or Samsung ML4550 Series PS as your default printer. The printer cover Close the printer cover. is not closed. Paper is jammed. Clear the paper jam. See page 9.1. No paper is loaded. Load paper. See page 5.4. The toner cartridge is not installed. Install the toner cartridge. The printer may be in manual feed mode and out of paper. Check the display message, add paper to the multi-purpose tray, and press OK on the printer's control panel. The connection cable between the computer and the printer is not connected properly. Disconnect the printer cable and reconnect it. The connection cable between the computer and the printer is defective. If possible, attach the cable to another computer that is working properly and try to print a document. You can also try using a different printer cable. The port setting is incorrect. Check the Windows printer setting to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the printer is attached to the correct one. Condition The printer does not print. (Continued) Printer selects print media from the wrong paper source. Paper does not feed into the printer. Print job is extremely slow. Possible cause Suggested solutions The printer may be configured incorrectly. Check the printer properties to ensure that all of the print settings are correct. The printer driver may be incorrectly installed. Reinstall the printer driver; See the Software Section. Try printing a test page. The printer is malfunctioning. Check the display message on the control panel to determine if the printer is indicating a system error. The paper source selection in the printer properties may be incorrect. For many software applications, the paper source selection is found under the Paper tab within the printer properties. Select the correct paper source. See the Software Section. Paper has not been loaded correctly. Remove paper from the tray and reload it correctly. Check that the paper size guides are set correctly. There is too much Remove excess paper from the paper in the tray. tray. The paper is too thick. Use only paper that meets printer specifications. The job may be very complex. Reduce the complexity of the page(s) or try adjusting the print quality settings. To adjust the print quality settings, reduce the resolution. If you have set the resolution to 1200 dpi (Best), change it to 600 dpi (Normal). See the Software Section. Change the port setting to the USB or network port to improve print speed. Your printer prints A4-sized paper at 43 ppm and lettersized paper at 45 ppm. If you use the ML-4551ND and install an option duplex unit in the ML4550 or ML-4551N, your printer prints A4-sized paper at 29 ipm and letter-sized paper at 30 ipm in the duplex printing mode. 9.9