Samsung ML-4551N User Manual (ENGLISH) - Page 65
Setting the hard disk in the printer properties, Optional Hard Disk Drive HDD
UPC - 635753624113
View all Samsung ML-4551N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4 Align the connector on the hard disk with the connector on the control board. Push the hard disk in until it is latched into place. 5 Fasten the four screws supplied with your new hard disk. Setting the hard disk in the printer properties After installing the hard disk, you need to select it in the printer properties to enable its use. Take the following steps: 1 Click the Windows Start menu. 2 For Windows 98/Me/NT 4.0/2000, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes. 3 Select the Samsung ML-4550 Series PCL 6 printer icon or Samsung ML-4550 Series PS printer icon. 4 Click the right mouse button on the printer icon and select Properties. 5 In PCL 6 Properties, click the Printer tab and then check Optional Hard Disk Drive (HDD). In PS Properties, click the Device Option or Device Settings tab and set the Optional Hard Disk Drive (HDD) option to Installed. 6 Click OK. 6 Close the control board cover by aligning the groove on it with the notch on the printer and sliding it. 7 Reinstall the duplex-slot cover or the duplex unit. 8 Reconnect the power cord and printer cable, and turn the printer on. 9 Print a configuration page from the control panel to check if the hard disk is correctly installed. See page 8.1. 10.5