Samsung RF30HBEDBSR User Manual Ver.00 (English, French(france), Spanish) - Page 10
Accessories And Required, Tools
![]() |
View all Samsung RF30HBEDBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
59.7" (1516 mm) 49 5/8" (1261.5 mm) CAUTION When moving your refrigerator To prevent floor damage, be sure the front adjusting legs are in the up position (above the floor). Refer to 'Adjusting the Level' in the manual (on page 15). ACCESSORIES AND REQUIRED TOOLS The following accessories are included with your refrigerator: Hex wrench Flat-blade screw Control Lever driver(-) Flooring For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface should be strong enough to support a fully loaded refrigerator. To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving the refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side. Required Tools (Not provided) You need the following tools to complete the installation of your refrigerator: Philips Flat-blade screw Socket wrench screwdriver (+) driver (-) (13/32") (10 mm) Pliers Allen wrench (3/16") (5 mm) DA68-03030A-00.indb 10 English - 10 2014. 3. 19. 9:48
![](/manual_guide/products/samsung-rf30hbedbsr-user-manual-ver00-english-frenchfrance-spanish-f1166cf/10.png)