Samsung RF30HBEDBSR User Manual Ver.00 (English, French(france), Spanish) - Page 33
Using the doors
![]() |
View all Samsung RF30HBEDBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
OPERATING • Tilt up the front of the drawer and pull it straight out. Then, move the drawer slightly in the direction of the arrow and pull it out of the refrigerator. See the illustration below. When the Flex Zone or LED lighting is not working, check the connectors [ ( 1 ), ( 2 ) shown below ] for cracks or leaks. 1. Disassemble the Flex Door. Refer to page 13 for disassembly instructions. 2. Open the cover rail cap with a flat-head screw driver to examine the connectors. (2) - To re-install : Insert the drawer into the frame rails, and then push back into place. - Slide each bin in above the desired location, and then push down until it stops. CAUTION The drawers need to be removed before the glass shelf above them can be lifted out. 5. Flex Zone - To remove the Flex Zone : Pull the Flex door (1) out to full extension. Lift the Flex Zone up, pulling it to your body with both hands. - To re-install the Flex Zone : Open the Flex door to full extension. Tilt the front of the Flex Zone up, place the back of the Flex Zone onto the rails, and then lower the front until the whole Zone rests on the rails. Using the doors Ensure that the doors close all the way and are securely sealed. When the refrigerator door is only partially open, it will automatically close. If the door is opened more than its auto close range, it will remain open. You must close it manually. DA68-03030A-00.indb 33 English - 33 2014. 3. 19. 9:49
![](/manual_guide/products/samsung-rf30hbedbsr-user-manual-ver00-english-frenchfrance-spanish-f1166cf/33.png)