Samsung RF30HBEDBSR User Manual Ver.00 (English, French(france), Spanish) - Page 16

Making Minor Adjustments, To The Doors, Between Out Door And - review

Get Samsung RF30HBEDBSR PDF manuals and user guides View all Samsung RF30HBEDBSR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

CAUTION Both control levers must be touching the floor to prevent the refrigerator from tipping over and causing personal injury or property damage. CAUTION If the refrigerator is installed on an uneven floor, it may tilt. To prevent this, adjust the control levers on both front legs so that they contact the floor firmly. 1. Pull out the freezer drawer ( 1 ) to reveal the lower hinge ( 2 ). 2. Insert the supplied allen wrench (5/32" (4 mm)) ( 3 ) into the shaft ( 4 ) of the lower hinge. 3. Adjust the height by turning the hex wrench ( 3 ) clockwise ( DOWN ) or counter clockwise ( UP ). (2) (3) (3) (4) (1) When you turn the hex wrench counter- clockwise ( ), the door will move up. If the right side is lower, perform the same procedure, but with the right control lever. It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. MAKING MINOR ADJUSTMENTS BETWEEN OUT DOOR AND IN DOOR After raising the out door, insert the supplied SHIM HINGE MIDDLE in the gap between the OUT DOOR and the HINGE-SHAFT. MAKING MINOR ADJUSTMENTS TO THE DOORS A leveled refrigerator is necessary for getting the doors perfectly even. For leveling instructions, review the previous section on leveling the refrigerator. Fixed part Adjustment part SHIM HINGE MIDDLE are enclosed with the refrigerator. The thickness of RING is 0.04" (1 mm). CAUTION The left door is fixed. To make minor adjustments between doors, adjust only the right door. Keep the Rings out of the reach of children and make sure that children do not play with them or put them into their mouths. English - 16 DA68-03030A-00.indb 16 2014. 3. 19. 9:48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
English - 16
CAUTION
Both control levers must be touching the floor
to prevent the refrigerator from tipping over and
causing personal injury or property damage.
CAUTION
If the refrigerator is installed on an uneven floor, it
may tilt. To prevent this, adjust the control levers
on both front legs so that they contact the floor
firmly.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the cover leg
front from the refrigerator, so we do not
recommend making small adjustments
with the control lever.
Instead, refer to the next page for the best
way to make minor adjustments to the
doors.
MAKING MINOR ADJUSTMENTS
TO THE DOORS
A leveled refrigerator is necessary for getting the
doors perfectly even.
For leveling instructions, review the previous
section on leveling the refrigerator.
Adjustment
Adjustment
part
part
Fixed part
Fixed part
The left door is fixed.
To make minor adjustments between
doors, adjust only the right door.
1. Pull out the freezer drawer ( 
1
 ) to reveal the
lower hinge ( 
2
 ).
2. Insert the supplied allen wrench (5/32” (4 mm))
( 
3
 ) into the shaft ( 
4
 ) of the lower hinge.
3. Adjust the height by turning the hex wrench
( 
3
 ) clockwise ( 
DOWN
DOWN
 ) or counter clockwise
( 
UP
UP
 ).
(3)
(3)
(1)
(1)
(3)
(3)
(2)
(2)
(4)
(4)
When you turn the hex wrench counter-
clockwise ( 
 ), the door will move up.
MAKING MINOR ADJUSTMENTS
BETWEEN OUT DOOR AND IN
DOOR
After raising the out door, insert the supplied SHIM
HINGE MIDDLE in the gap between the OUT
DOOR and the HINGE-SHAFT.
SHIM HINGE MIDDLE are enclosed with
the refrigerator.
The thickness of RING is 0.04” (1 mm).
CAUTION
Keep the Rings out of the reach of children and
make sure that children do not play with them or
put them into their mouths.
DA68-03030A-00.indb 16
DA68-03030A-00.indb
16
2014. 3. 19.
9:48
2014. 3. 19.
9:48