Samsung SP-H03 User Manual (user Manual) (ver.1.0) (English) - Page 19
Connecting with a PC, Connect the D-Sub Gender Cable - cables
UPC - 729507813790
View all Samsung SP-H03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
• The setup process might vary depending on your type of computer or version of Windows. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) • This projector supports 32 bit color quality (per pixel) when it is used as a PC monitor. • Projected images may differ from the images on your monitor depending on the monitor manufacturer or Windows version. • When connecting the projector to a PC, make sure that the PC setup complies with the display settings supported by this projector. If it does not, you may have signal problems. 2-8-2. Connecting with a PC PC IN AV IN RGB Make sure that your PC and projector are turned off. 1. Connect the D-Sub Gender Cable to [PC IN] on the back of the projector and RGB on the PC. Refer to "PC Timing (D-Sub)" in the "Supported Display Modes" section for information on supported input signals. 2. Plug in the power cords of the projector and the PC. Using the Projector 1. Turn on the projector and select ĺ . If you cannot select mode, check that the D-Sub Gender Cable is properly connected. 2. Turn on the PC, and then set the PC Environment (screen resolution, etc.) if necessary. 3. Adjust the screen. Installation and Connection 2-8