Sanyo EF60 Instruction Manual, PLC-EF60A - Page 13
INPUT 5 Vacant for Optional Interface Board, INPUT 4 Vacant for Optional Interface Board
View all Sanyo EF60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Preparation Preparation q w u y t r e✽ q INPUT 4 (Vacant for Optional Interface Board) Optional interface board can be installed into this slot. (p.21, 73) w INPUT 5 (Vacant for Optional Interface Board) Optional interface board can be installed into this slot. This input accepts digital signals only. (p.21, 73) e R/C JACK Connect the remote control to this jack with the wired remote cable (not supplied) to use the remote control as wired. (p.25) t USB (Series B) This port is used for the projector maintenance. y SERIAL PORT OUT This terminal outputs signal from SERIAL PORT IN. When controling more than two projectors from a computer, connect the other projector to this terminal with a serial cross cable (commercially available). u SERIAL PORT IN When controling the projector from a computer, connect the computer to this terminal with a serial cross cable (commercially available). r USB Connect a USB mouse (commercially available) to control On-Screen Menu. (p.25) ✽ A built-in micro processor which controls this unit may occasionally malfunction and needs to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively. 13