Sanyo EF60 Instruction Manual, PLC-EF60A - Page 53

Setting Setting Analog out The ANALOG OUT terminal is for output of the analog signal coming from the ANALOG IN terminal in the Input 1 terminals. (See page 12.) Select "On" to enable the signal output through the ANALOG OUT terminal always except in the stand-by mode or "Off" to disable the signal output. Analog out is not available when selecting the other Inputs except Input 1. Select Input 1 so that Analog out will be available. (p.30, 36) Lens memory Lens memory feature enables you to store the lens shift, zoom and focus adjustment for each Input. When selecting Lens memory, Input 1~5 will be displayed. Move the pointer to an Input and press the SELECT button. Choose one of the following settings for the Input. Off applies the lens shift, zoom and focus adjusted last. Memory . . . . stores the lens shift, zoom and focus currently adjusted for each input. When switching to the input with "Memory" selected, the lens moves to the stored position. ✔Note: • Lens memory is available only in the lens having memory functions of itself. Contact to the sales dealer or the service station for available lens. • 100% accurate lens memory is not guranteed. If an accurate lens position, zoom and focus cannot be obtained with Lens memory function, adjust them respectively in each case. Lens memory Shutter level Press the SELECT button at Lens memory and choose an Input for which you want to store the lens shift, zoom and focus adjustment and then select "Memory" for the input. Select [Yes] to activate the setting. Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. In addition, this function enhances the effectiveness of contrast by 80% opening up the shutter inside the projector. Each setting for the Shutter function can be altered as follows: Level Sets up shutter level when closing the mechanical shutter. Normal 0% light blocking High contrast . . . . .20% light blocking Protection Prohibits the shutter operation from the remote control and the projecto's top control. Remote control . . Selecting "On" prohibits the shutter operation from the remote control. Projector Selecting "On" prohibits the shutter operation from the top control. It is possible to prohibit the shutter operation from both of the remote control and the top control. Shutter protection When pressing the SELECT button at Shutter, the Shutter setting menu appears. Select Protection and then a desired setting for Remote control and Projector. 53