Sanyo EF60 Instruction Manual, PLC-EF60A - Page 19

Lens Shift Adjustment, Level Adjustable Feet, downward respectively by rotating front and back feet.

Page 19 highlights

Installation Lens Shift Adjustment Lens shift feature is provided to move the position of the projected image vertically by 50% and horizontally by 10% respectively without any image distortion. ✽ Lens shift range varies depending on lens and projectors. The range in this manual is the case of LNS-W04. 50% 10% 10% 50% Installation Level Adjustable Feet This projector has four level adjustable feet. The projection angle can be adjusted by rotating each foot. Adjust the four feet to obtain best position of the projected image and make the projector stable. The projection angle is adjustable up to 3.65 degrees upward and downward respectively by rotating front and back feet. The projector can project image vertically and horizontally in the range of 360 degrees. For proper installation, refer to "Setup In Proper Directions" on page 6. Adjustable feet 3.65° 3.65° Projection angle is adjustable up to 3.65 degrees upward and 3.65 degrees downward by adjusting front and back feet. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

19
Installation
Adjustable feet
Lens shift feature is provided to move the position of the projected image vertically by 50% and horizontally by 10%
respectively without any image distortion.
Lens shift range varies depending on lens and projectors. The range in this manual is the case of LNS-W04.
Level Adjustable Feet
This projector has four level adjustable feet. The projection angle
can be adjusted by rotating each foot. Adjust the four feet to
obtain best position of the projected image and make the projector
stable.
The projection angle is adjustable up to 3.65 degrees upward and
downward respectively by rotating front and back feet.
The projector can project image vertically and horizontally in the
range of 360 degrees. For proper installation, refer to “Setup In
Proper Directions” on page 6.
Projection angle is adjustable up to 3.65 degrees
upward and 3.65 degrees downward by adjusting front
and back feet.
3.65
°
3.65
°
Lens Shift Adjustment
Installation
50%
50%
10%
10%