Sanyo PDG-DWT50L Owners Manual - Page 85
Desktop Front, Desktop Rear, Ceiling Front, Ceiling Rear, Set Control panel lock On/Off.
![]() |
UPC - 086483067563
View all Sanyo PDG-DWT50L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
5. Using On-Screen Display ITEM Key lock DynamicBlack RC sensor Network setting Standby mode PC control DESCRIPTION Set Control panel lock On/Off. Note: This Control Panel Lock does not affect the remote control functions. When the control panel is locked, pressing and holding the Cancel button on the projector cabinet for about 10 seconds. The setting will change to Off. DynamicBlackTM improves the black level of the projector. Black level is the darkest part of a picture and varies between viewing devices and environments. Set DynamicBlack on/off. Set RC sensor fields. Range: Both, Front, Back Opens Network preferences tab (see Network setting on page 82). Select Standby mode. Range: Normal and Power-saving Enables the path selection for PC control. Range: PC control or Network. Ceiling & Rear Ceiling & Rear enables you to set how the projected image is displayed. Select from the following: Desktop Front - Standard forward facing projection (Default setting). Desktop Rear - Standard rear projection. Enables the projector to produce the image from behind the screen by reversing the image. Ceiling Front - Forward facing ceiling mounted projection. Enables ceiling mounted projection by inverting the image. Ceiling Rear - Rear ceiling mounted projection. Enables ceiling mounted projection from behind the screen by inverting and reversing the image. Desktop front Ceiling rear Desktop rear Ceiling front 76
![](/manual_guide/products/sanyo-pdgdwt50l-owners-manual-b0da8e0/85.png)