Sanyo PDG-DWT50L Owners Manual - Page 93
Range: Code 1, Code 2, Range: Off, 100[H]
UPC - 086483067563
View all Sanyo PDG-DWT50L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5. Using On-Screen Display ITEM Remote control Message Filter warning Search mode DESCRIPTION This option switches remote control codes. Range: Code 1, Code 2, Code 3, Code 4, Code 5, Code 6, Code 7, Code 8 This option turns on or off messages. Range: Off or On Set this item to on to have the projector display a message when the air filter needs servicing. Range: Off, 100[H], 200[H], 500[H], 1000[H] This feature sets the Auto Adjust mode. Range: Normal, Fine On start On start enables the projector to start automatically when the power cable is connected to an active power outlet and the main power switch is on. This eliminates the need to always use the POWER (On) button on the remote control or projector cabinet. To use the On start function, you must first press the main power switch to On before connecting the power cable. Note: When the projector is off by using the POWER button (or put in the standby mode) and the power cable is disconnected, On start will not activate after power (AC) is applied. When the projector is off by using the Direct Power Off function or after the power (AC) is removed (no standby mode), On start will be activated after power (AC) is applied. The Direct Power Off function means you can turn off the power (AC) to the projector by using a power strip equipped with a switch and a breaker. Power management Power management enables the projector to automatically turn off if there is no signal received by any input. 84