Sanyo SCP 5150 User Guide - Page 121

Personal Information 12 To discard new data: 1. Press any key when the warning message appears. 2. Select Discard (right softkey). 3. Highlight Yes and press . Tip: Replace don't affect to the downloaded data that you have already assigned. Because the downloaded data that you have set to wallpaper or incoming call is not erased. Using the Downloaded Data Setting a Downloaded Melody to the Ringer or Start-up/Power-off Tone. 1. From the Standby mode, press to display the main menu. 2. Highlight Downloads and press . 3. Highlight Data List to display the Downloaded data. 4. Highlight your desired downloaded melody title and press . Then starts to play the selected melody. 5. Press or wait for ending of the melody play. 6. Highlight Set Ringer, Set St-up Tone or Set Pw-off Tone and press . 7. Select the space to assign your selected melody. ᮣ If your selected space is already assigned, you are prompted whether overwrite it or not. ᮣ The capacity of downloading is as shown below. Item Maximum Size per Unit Maximum Assignment Ringer Melody ~20 KB ~100 KB 20 files 2 files Start-up Tone ~20 KB 3 files Power-off Tone ~20 KB 3 files See the SANYO Multimedia Master User Guide included in the SCP-5150 for downloading. Sprint PCS Wireless WebTM Connection kit must be purchased for downloading the data. Note: If you have no downloaded data, "No Data Downloaded" is shown on the display. Tip: It's better to erase the downloaded data that you have already set to Ringer or Start-up/Power-off tone. See page 115. Section 12 Personal Information Management 113