Sanyo SCP 5150 User Guide - Page 80

Internal Phone Book Entry Options When you display an Internal Phone Book list, highlight your desired entry and press , then select your desired label category and press . ᮣ Call to dial the phone number. (If you are roaming and have the Call Guard feature activated, you are required to take an extra step to proceed. See "Setting an Alert When Roam Charges Apply (Call Guard)" on page 22.) ᮣ Call Alarm to set the call alarm to the entry. ᮣ Set Speed Dial to set the speed dial to the entry. ᮣ Set Voice Dial to set the voice dial to the entry. ᮣ Prepend to alter a phone number by adding additional numbers. ᮣ Erase to erase the selected number. To erase the whole entry under the name, highlight the entry and press then highlight Erase Entry and press . ᮣ Send Email to send the e-mail. (Only Email category) ᮣ Visit Site to visit the Web site. (Only Web category) Adding a Phone Number or Address to an Internal Phone Book Entry To add a phone number or address to an entry: 1. From the Standby mode, press to display the main menu. 2. Highlight Phone Book, and press . 3. Highlight Find Name, and press . ᮣ Press of the Navigation key for the shortcut (steps 1 through 3). 4. Select the entry you wish to add phone numbers/e-mail/web addresses to, and press . 5. Select your desired label category by scrolling, and press . 6. Enter the number or address, and press . 7. Press Save (left softkey). ᮣ If you enter the already stored number or address, you will be prompted to select Yes or No to store again at step 6 above. Note: Data or Fax can only be dialed through a personal computer. Section 9 72 Using Your Internal Phone Book