Sennheiser ew 300 G2 Instructions for Use - Page 64

Muting the transmitters Both transmitters have a MUTE switch that noiselessly mutes the transmitter's audio signal without switching the transmitter off. Muting the SK 300 G2 bodypack transmitter Ƹ ̈ Set the MUTE switch Ƹ to the position 'MUTE'. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. ̈ Set the MUTE switch back to the original position to retransmit the audio signal. Muting the SKM 300 G2 radiomicrophone ̈ Turn the protective cap ¶ at the bottom of the radiomicrophone so that the MUTE switch Ƹ becomes accessible. ¶ ̈ Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. Ƹ ̈ Set the MUTE switch back to the original position to retransmit the audio signal. Activating/deactivating the lock mode ew 300 G2 transmitters and receivers have a lock mode that can be activated or deactivated via the operating menu (see "Activating/deactivating the lock mode" on page 34). The lock mode prevents that the transmitter or receiver is accidentally programmed or switched off during operation. 19