Sennheiser ew 300 G2 Instructions for Use - Page 74

Scan Scanning the channel banks for free channels (EM 300 G2 only) Before putting one or several transmission links into operation, you should scan the channel banks for free channels. Scan Channel list Scan new Scan reset Displaying the last scan result ̈ Select the "Scan" menu. ̈ Select "Channel list" to display the last scan result. The number of free channels is displayed for all channel banks. Bank 1 2 3 4 Free 08 08 03 04 Bank 5 6 7 8 U Free 06 08 02 01 08 Channel 1.01 786.300 MHz B.CH ̈ For further details, select a channel bank by using the ̆/̄ buttons and then press the SET button. This gets you into the "Channel" menu where you can select a channel of this channel bank or display the frequency of a channel. Starting the scan ̈ Before starting the scan, switch all transmitters of your system off, since channels used by switched-on transmitters will not be displayed as "free channels". Scan Channel list Scan new Scan reset Bank 1 2 3 4 Free 08 08 03 04 Bank 5 6 7 8 U Free 06 08 02 01 08 ̈ Select the "Scan" menu. ̈ Select "Scan new" and confirm your selection by pressing the SET button. After the scan is completed, the number of free channels is displayed for all channel banks. Channels that are used or subject to interference are locked and cannot be selected. ̈ For further details, select a channel bank by using the ̆/̄ buttons and then press the SET button. This gets you into the "Channel" menu where you can select a channel of this channel bank or display the frequency of a channel. Scan Channel list Scan new Scan reset Bank 1 2 3 4 Free 08 08 08 08 Bank 5 6 7 8 U Free 08 08 08 08 08 Releasing locked channels ̈ Select the "Scan" menu. ̈ Select "Scan reset" and confirm your selection by pressing the SET button. The last scan result is deleted and all channels can now be selected again. 29