Sennheiser ew 300 G2 Instructions for Use - Page 73
Adjustment tips for the operating menu - frequency range
![]() |
View all Sennheiser ew 300 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
BANK Bank CHAN Channel TUNE Tune Adjustment tips for the operating menu Switching between channel banks Via the "Bank" menu, you can switch between the nine channel banks. The channel banks "1" to "8" have eight switchable channels that are factorypreset to a transmission/receiving frequency (see "The channel bank system" on page 4). The channel bank "U" (user bank) has eight switchable channels to store your selection out of 1440 transmission/receiving frequencies that are freely selectable within the preset frequency range. When switching from one channel bank to another, the channel with the lowest channel number is automatically displayed. If, during the last scan of this channel bank, an interfering frequency was detected on the channel with the lowest channel number (see "Scanning the channel banks for free channels (EM 300 G2 only)" on page 29), the receiver display panel automatically displays the next free channel. Switching between the channels in a channel bank Via the "Channel" menu, you can switch between the eight channels in a channel bank. Always set the transmitter and the receiver of a transmission link to the same channel. After scanning the channel banks (see "Scanning the channel banks for free channels (EM 300 G2 only)" on page 29), only the free channels are displayed. Set the transmitter to one of the free channels. Selecting the frequencies to be stored in the channel bank "U" Via the "Tune" menu, you can select the frequencies to be stored in the channel bank "U" (user bank). When you have selected one of the channel banks "1" to "8" and then select the "Tune" menu, the transmitter or receiver automatically switches to channel 01 of the channel bank "U". In this case, "U.01" briefly appears on the display. ̈ Use the ̆/̄ buttons to select the desired transmission or receiving frequency. Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 36 MHz max. For intermodulationfree frequencies, please refer to the enclosed frequency table. 28
![](/manual_guide/products/sennheiser-ew-300-g2-instructions-use-9112c0a/73.png)