Sharp 705SH User Guide - Page 225

5 Press M q Alarm is set. ^ For more settings, start over from Step 1 on P.11-10. 6 Press g to exit Handset returns to Standby and e appears. At Alarm Time Alarm is activated, sounding/vibrating, etc. according to related settings. ^ If 705SH is off but Wake-up Alarm (see P.9-13) is On, 705SH turns on at Alarm Time; Alarm activates and 705SH sounds/ vibrates according to related settings. However, if 705SH is shutting down at Alarm Time, 705SH restarts and Alarm activates within two minutes of shutdown time. ^ Image appears if System Graphics is set (see P.9-3). However, video and SMAF file images take priority over System Graphics. Stopping Alarm C Press M 3, g or i. ^ When handset was off at Alarm Time, Switch Phone On? appears. Press N i or M c. B Handset turns off after 20 seconds of inactivity. Snooze C When Snooze (see P.11-12) is set, Alarm repeats at the set interval. ^ When other Alarm Time arrives while Switch Phone On? appears, the other Alarm is activated. ^ Accept incoming calls (except when handset was off at Alarm Time). End the call to reactivate Snooze. ^ If other Alarm Time arrives while Snoozing, the other Alarm is activated only after Snooze is cancelled. C To cancel Snooze, follow these steps while Alarm is activated or Snoozing. Press M 3, g or i A Press N i ^ Snooze is cancelled automatically 60 minutes after initial Alarm Time. Tip H ^ If Alarm Time arrives during a call or while recording 11 Tools video, no tone will sound. End the call or exit mobile camera to reactivate Alarm. ^ In Manner mode, volume depends on Manner settings (Silent by default). ^ If Auto Power On Time and Alarm Time are the same, Alarm is activated after handset turns on. ^ When handset turns on at Alarm Time with PIN Entry (see P.9-18) active, tone is fixed to Alert 1 except when a tone in Preset Sounds is assigned. ^ When battery is removed and reinstalled after Alarm is set, handset may not turn on at Alarm Time. To prevent this, turn handset on and then off. 11-11