Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for facsimile) - Page 15
Loading A Document
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
LOADING A DOCUMENT A document can be loaded in the auto document feeder or on the document glass. Multiple-page documents and long documents can be loaded in the auto document feeder. Single-sheet documents and bound documents that cannot be loaded in the auto document feeder can be loaded on the document glass. USING THE AUTO DOCUMENT FEEDER 1 1 Lift the document glass cover and make sure a document is not placed on the document glass. Gently close the cover. 2 Adjust the document guides on the auto document feeder to the width of the document. 3 Align the edges of the document pages and then insert the stack in the document feeder so that the first page is face down. Insert the stack into the auto document feeder until it stops. The stack should not be higher than the indicator line (maximum 50 pages, or 30 pages for 8-1/2"x14" or larger documents). USING THE DOCUMENT GLASS 1 Open the document glass cover, and place the document face down on the document glass. Gently close the cover. Regardless of the size of the original, place the original in the far left corner of the document glass. (Align the upper left-hand corner of the original with the tip of the mark.) Document glass scale mark Document glass scale mark Original size detector NOTE Do not place any objects under the original size detector plate. Closing the document glass cover with an object underneath may damage the original size detector plate and prevent correct detection of the document size. 5-1/2"x8-1/2" 8-1/2"x14" 8-1/2"x11" 11"x17" 8-1/2"x11"R 1-7