Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for facsimile) - Page 22
Sending A Fax
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
SENDING A FAX BASIC PROCEDURE FOR SENDING FAXES 1 Make sure the machine is in fax mode. When the IMAGE SEND key light is on, the machine is in fax mode. If the light is not on, press the IMAGE SEND key. 2 Load the original. Refer to the following pages: • Using the auto document feeder: Page 1-7 • Using the document glass: Page 1-7 If you are using the document glass to send multiple pages, load the first page first. NOTE You cannot load documents in both the auto document feeder and on the document glass and send them in a single fax transmission. If documents are loaded in both the auto document feeder and on the document glass, only the document in the auto document feeder will be scanned and transmitted. 3 Check the original size. STANDARD RESOLUTION AUTO 81/2X11 ORIGINAL If you loaded a nonstandard size document or the document size was not correctly detected, touch the ORIGINAL key and set the document size. (Refer to page 1-8.) 6 Dial the fax number. The number that you entered appears in the message display. If it is not correct, press the C key and re-enter the number. You can also use the REDIAL key (page 1-11) or an autodial number (2-5). Entering a pause. PAUSE MEMORY:100% TO RECEPTION If you need to insert a pause NEXT ADD between digits to access an outside line or dial an ADDRES international number, touch DIRECTO the PAUSE key in the upper right-hand corner of the SUB ADD screen. Each time you touch the PAUSE key, a hyphen ("-") appears and a 2-second pause* is inserted. After entering a number, you can also touch the PAUSE key to enter a hyphen, and then enter another number using the numeric keys or a one-touch key.This connects the numbers together (Chain dialing). * The duration of each pause can be changed with the key operator program. (Refer to page 8-4.) 4 If needed, adjust the resolution setting. (Refer to page 1-9.) STANDARD RESOLUTION AUTO 81/2X11 ORIGINAL 5 If needed, adjust the exposure setting. (Refer to page 1-10.) SPECIAL MODES SRANDARD RESOLUTION DUAL PAGE SCAN POLLING EXPOSURE 2-2