Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for facsimile) - Page 34
Using The Polling Function
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TRANSMISSION AND RECEPTION USING THE POLLING FUNCTION USING THE POLLING FUNCTION A document should not be loaded in the machine when the following operation is performed.When used in conjunction with the timer transmission function, only one polling job can be stored. NOTE If the other machine has a polling security function (refer to page 3-8), use the key operator program to program your own fax number (refer to page 8-4), and ask the operator of the other machine to appropriately program your fax number in that machine. 1 Touch the SPECIAL MODES key in fax mode, and then touch the POLLING key. The POLLING key is SPECIAL MODES highlighted and the polling icon appears. STANDARD RESOLUTION DUAL PAGE SCAN POLLING EXPOSURE To cancel polling, touch the POLLING key once again to cancel the selection. 3 Dial the number of the other fax machine or touch an auto-dial key (one-touch or group key) (refer to page 2-5). If you are performing serial CORPO.TPS SHARP GROUP SPE polling, touch the NEXT ADDRESS key and repeat this step. (Page 3-3) 2 Touch the OK key. AKER REDIAL OK You will return to the initial screen. NOTE When performing serial polling, an auto-dial key that includes a sub-address or passcode (page 4-2) cannot be selected. 4 When you have finished entering the destination(s), press the START key. JOB STORED appears in the screen. Your machine prints the document after receiving it from the sending machine. NOTE • To cancel the operation Press the JOB STATUS key and then cancel the operation as explained on page 2-6. s Manual polling A document should not be loaded in the machine when the following operation is performed. Manual polling is begun on the signal of the other party. 1 Touch the SPEAKER key in fax mode, and dial the number of the other machine. SPEAKER A one-touch key or the RE REDIAL key can also be used. AX MEMORY:100% AUTO RECEPTION ADDR If you have connected an DIRE extension phone to the machine, you can lift the SUB extension phone and then dial. 3 When you hear the fax tone from the other machine, press the POLLING key. POLLING appears in the display. ER POLLING L PAGE SCAN EXPOSURE 2 Touch the SPECIAL MODES key. SPECIAL MODES STANDARD RESOLUTION 4 Polling reception begins. If you lifted an extension phone to dial, replace the extension phone.Your machine prints the document after receiving it from the sending machine. NOTE Serial polling cannot be performed manually. When polling reception ends, repeat steps 1 through 4. 3-6