Sharp CD-DK890N CD-DK890N Operation Manual - Page 43

Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. General Power source AC 120 V ~ 60 Hz Power consumption 105 W Dimensions Width: 10 - 1/4" (260 mm) Height: 13" (342.7 mm) Depth: 12 - 7/8" (324 mm) Weight 16.32 lbs. (7.4 kg) Amplifier Output power Output terminals Input terminals RMS : Total 250 W (125 W per channel into 6 ohms at 1 kHz, 10% Total harmonic distortion.) FTC : 90 W minimum RMS per channel into 6 ohms from 100 Hz to 20 kHz, 10% Total harmonic distortion. Front Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Audio In (audio signal): 250 mV/47 k ohms Video output: 1Vp-p CD player Type Signal readout D/A converter Frequency response Dynamic range 5-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz 90 dB (1 kHz) Tuner Frequency range FM: 87.5 - 108.0 MHz AM: 530 - 1,720 kHz Cassette deck Frequency response Signal/noise ratio 50 - 14,000 Hz (normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) Wow and flutter 0.3 % (WRMS) Speaker Type Maximum input power Rated input power Impedance Dimensions Weight 2-way type speaker system 2" (5 cm) tweeter 6 - 5/16" (16 cm) woofer 250 W 125 W 6 ohms Width: 7 - 7/8" (200 mm) Height: 13" (330 mm) Depth: 8 - 11/16" (220.5 mm) 7.0 lbs. (3.18 kg)/each References CD-DK890N 43