Sharp CD-E500 Service Manual - Page 43
normally, but no sound is produced. Or the sound
View all Sharp CD-E500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
(4) PLL system check. When a disc is loaded, start play operation. The HF waveform is normal, but the TOC data cannot be read. Check the PDO waveform. (Figure 43-1) Check around pins 73~78 on IC401. Stopped CH1=500 mV DC 10:1 PDO1 3 CD-E500 CD-E55/E44 CH3=1 V DC 10:1 1999/04/05 17:33:17 CH4=1 V DC 10:1 500 ms/div (500 ms/div) NORM:20 kS/s 4 PDO2 T FDO 1 =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.00 V CH4 : 0.00 V CH1 v/DIV 500 mV =Record Length= Main : 100 K Zoom : 2 K =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0 ns Hold off : 0.2 µs Figure 43-1 (5) Others. The HF waveform is normal and the time is displayed normally, but no sound is produced. Or the sound has dropouts. Is pin 52 (C2F) on IC401 "L" ? No Yes 1. When playing at normal speed. Check the peripheral circuit at pin 39 (DOUT) on IC401 and the waveform (Figure 43-2). If OK, Check the unit. There are too many error flags on a damaged disc which makes error correction impossible. Check again using a known good disc. Stopped T CH1=2 V DC 10:1 T 1999/04/07 09:25:28 500 ns/div (500 ns/div) NORM:200 MS/s 1 DOUT =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 1 K Zoom : 100 =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887 ms Hold off : 0.2 µs Figure 43-2 - 43 -