Sharp FO-2080 FO-2080 Online Operation Manual - Page 29
Troubleshooting, PRINTING AND SCANNING PROBLEMS - user guide
View all Sharp FO-2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3 TROUBLESHOOTING Troubleshooting (part 1) If you experience difficulty using the machine, check the following troubleshooting guide before calling for service. Many problems can be easily resolved by the user. If you are unable to solve the problem using the troubleshooting guide, turn off the power switch and unplug the machine, and contact your SHARP service center. PRINTING AND SCANNING PROBLEMS In addition to this section, troubleshooting information can also be found in the README files for each of the software programs. The README file (readme.txt) is copied to your computer when the software is installed, and can be found in the "Program Files" "SHARP" - "FO2080" folder on the drive where you installed the software. Problem The machine does not print. Cause and solution The machine is not correctly connected to your computer. → Check both ends of the USB cable or LAN cable, and make sure you have a solid connection. Try a known good cable. If the machine is used as a network printer, 1. The IP address has changed automatically because "Get IP Address Automatically" was selected. 2. The machine's IP address was changed to an incorrect IP address using "Set the IP Address". → If you are assigning an IP address using "Set the IP Address", select "Assign IP Address" and manually enter the correct IP address. If the machine is used as a shared printer, the name of the computer to which the machine is connected or the share settings have changed. → Reconfigure the port setting of the shared printer. The machine is not selected in the application. → After choosing "Print" from the "File" menu, make sure that "SHARP FO-xxxx" is selected as the printer in the "Print" window. Page Operation Manual Operation Manual - 5 CONTENTS INDEX 29