Sharp MX 5500N MX-5500N MX-6200N MX-7000N Operation Manual Suite - Page 233
System Settings Administrator: Erase Width Adjustment, factory default setting is 1/2 10 mm.
![]() |
View all Sharp MX 5500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
When the erase function is used, erase takes place at the edges of the original image. If you also use a reduction or an enlargement setting, the erase width will change according to the selected ratio. For example, if the erase width setting is 1" (20 mm) and the image is reduced to 50%, the erase width will be 1/2" (10 mm). To cancel the erase setting... Touch the [Cancel] key in the screen of step 3. System Settings (Administrator): Erase Width Adjustment The default erase width setting is linked to the copy mode system setting, and can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is 1/2" (10 mm). 76
![](/manual_guide/products/sharp-mx-5500n-mx5500n-mx6200n-mx7000n-operation-manual-suite-55eab6b/233.png)
76
When the erase function is used, erase takes place at the edges of the original image. If you also use a reduction or an
enlargement setting, the erase width will change according to the selected ratio. For example, if the erase width setting is 1"
(20 mm) and the image is reduced to 50%, the erase width will be 1/2" (10 mm).
To cancel the erase setting...
Touch the [Cancel] key in the screen of step 3.
System Settings (Administrator): Erase Width Adjustment
The default erase width setting is linked to the copy mode system setting, and can be set from 0" to 1" (0 mm to 20 mm). The
factory default setting is 1/2" (10 mm).