Sharp MX 5500N MX-5500N MX-6200N MX-7000N Operation Manual Suite - Page 401
If a ratio setting is used in combination with an erase setting, the erase width will change
View all Sharp MX 5500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 401 highlights
Press the [COLOR START] key ( ) or or the [BLACK & WHITE START] key ( ). Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 4 have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.) To cancel scanning of the original and copying... Press the [STOP] key ( ). If a ratio setting is used in combination with an erase setting, the erase width will change according to the selected ratio. For example, if the erase width setting is 1" (20 mm) and the image is reduced to 50%, the erase width will be 1/2" (10 mm). To cancel the erase setting... Touch the [Cancel] key in the screen of step 3. System Settings (Administrator): Erase Width Adjustment The default erase width can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is 1/2" (10 mm). 50