Sharp MX-M464N Operating Guide - Page 101

BEFORE USING THE MACHINE Replacing the staple cartridge (saddle stitch unit) Before starting this procedure, remove all output from the output tray of the saddle stitch finisher. Do not replace removed output in the output tray. Open the front cover. 1 Grasp the handle on the saddle stitch unit and pull it slowly out until it stops. 2 Pull the staple unit in the saddle stitch unit out and then rotate it up. 3 Grasp the left and right side of each empty staple cartridge and remove the 4 cartridges. Load new staple cartridges. Replace both staple cartridges. Remove the cover from each staple cartridge and then install the cartridge. 5 1-60 Contents