Sharp MX-M464N Operating Guide - Page 177

COPIER Changing the copy settings for each set of originals The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. Perform the step below before pressing the [Start] key to scan the originals in step 4 above. Touch the [Change] key. 1 Place next original and press [Start]. to change copy settings, press [Change]. Change Read-End Color Mode Full Color Plain 8½x11 Read-End Change the desired copy settings in the screen that appears and press the [Start] key. 2 Exposure Auto Copy Ratio 100% 1. 8½x11 2. 8½x11R 3. 8½x14 4. 11x17 Original Auto 8½x11 Paper Select Auto 8½x11 Plain Preview Scanning of the originals will begin using the changed copy settings. To cancel the copy setting changes and begin copying without scanning the new originals, touch the [Read-End] key. • The original size cannot be changed manually with the [Original] key. If the automatic original detection function is operating, the original size will be detected for each set of originals placed. • When the bypass tray is selected, it is not possible to change the paper type. • If "XY Zoom" was set for the ratio when the previous original was scanned, it will not be possible to change the ratio. • When "Job Build" is used in combination with the functions below, the [Change] key will not appear in the screen of step 1 above. Pamphlet copy, tandem copy, covers/inserts, transparency inserts, multi-shot, book copy, tab copy, staple sort 2-55 Contents