Sharp MX-M464N Operating Guide - Page 99
Supplies, Saddle Stitch Finisher Large Stacker, Maintenance
View all Sharp MX-M464N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
BEFORE USING THE MACHINE SUPPLIES The saddle stitch finisher (large stacker) requires the following staple cartridge: Finisher unit Saddle stitch unit Staple cartridge (approx. 5000 staples per cartridge x Staple cartridge (approx. 2000 staples per cartridge x 3 three cartridges) AR-SC2 cartridges) AR-SC3 SADDLE STITCH FINISHER (LARGE STACKER) MAINTENANCE When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below to replace the staple cartridge. Replacing the staple cartridge (finisher unit) Open the front cover. 1 Squeeze the green parts of the staple case and pull the case up and then out. 2 Remove the empty staple cartridge Press the lock button to release the staple case cover and then remove the staple cartridge. 3 When staples remain, the staple cartridge cannot be removed. 1-58 Contents