Sharp MX-M464N Operating Guide - Page 73
TRAY SETTINGS FOR TRAY 3 TO 4, Stand/500&2000 Sheet Paper Drawer
View all Sharp MX-M464N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 3 TO 4 (Stand/500&2000 Sheet Paper Drawer) LOADING PAPER IN PAPER TRAY 3 - TRAY 4 8-1/2" x 11" or A4 size paper can be loaded in tray 3 and tray 4. These are parallel large-capacity trays that allow a total of approximately 2000 sheets of SHARP standard paper (20lbs. (80 g/m2 )) to be loaded. If you wish to change the paper size of tray 3 or tray 4, see "CHANGING THE PAPER SIZE IN PAPER TRAY 3 - TRAY 4" on the next page. For information on how to load paper and change the paper size for a single tray, see "TRAY SETTINGS FOR TRAY 1 TO 4" (page 1-30). Pull out paper tray 3-tray 4. Gently pull the tray out until it stops. 1 Fan the paper. Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed. 2 Load paper in the left and right trays. Indicator line Lift the paper guide and load paper in tray 3.*1 Approximately 1150 sheets of SHARP standard paper (20lbs. (80 g/m2)) can be loaded. Be sure to return the paper guide to its original position after loading the paper. Lift the paper guide and load paper in tray 4.*1 3 Approximately 850 sheets of SHARP standard paper Indicator (20lbs. (80 g/m2)) can be loaded. line *1 The paper stack must not be higher than the indicator line. 1-32 Contents