Sharp MX-M464N Operating Guide - Page 98

BEFORE USING THE MACHINE SADDLE STITCH FINISHER (LARGE STACKER) This includes the offset function that offsets each set of output from the previous set, the staple sort function that staples each set of output, the saddle stitch function that automatically staples and folds output, and the fold function that folds output in half. An optional hole punching unit can also be installed to punch holes in output. PART NAMES       (1) Stapler compiler This temporarily stacks paper to be stapled. (2) Output trays (upper tray, lower tray) Stapled and offset output is delivered to this tray. The tray is slidable. Extend the tray for printing on large-size paper (12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", A3W, A3 and B4 sizes). (3) Saddle stitch tray guide This guides the output as it is delivered to the tray. Before printing, attach the saddle stitch tray guide in the appropriate position below for the paper size to be used. (4) Saddle stitch tray This guides the output as it is delivered to the tray. Before printing, attach the saddle stitch tray guide in the appropriate position below for the paper size to be used. (5) Top cover Open this cover to remove a paper misfeed. (6) Front cover Open this to replace the staple cartridge, remove jammed staples, or remove misfed paper. 11" x 17", 8-1/2" (A3ʗB4 x 14") 8-1/2" x 11" (A4R) • A paper pass unit is required to install a saddle stitch finisher. • Do not place heavy objects on the saddle stitch finisher (large stacker) or press down on the saddle stitch finisher (large stacker). • Use caution when you turn on the power and when printing is taking place, as the tray may move up and down. • A saddle stitch finisher (large stacker) cannot be installed simultaneously with a saddle stitch finisher, a finisher (large stacker) or a finisher. 1-57 Contents