Sharp MX-M464N Operating Guide - Page 74
Changing The Paper Size In Paper Tray 3 - Tray 4
View all Sharp MX-M464N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
BEFORE USING THE MACHINE Gently push tray 3-tray 4 into the machine. Push the tray firmly all the way into the machine. 4 Set the paper type. 5 If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, or if the paper type was changed, be sure to change the appropriate settings as explained in "Paper Tray Settings" (page 7-13) in the System Settings. 6 Loading paper in paper tray 3/tray 4 is now complete. CHANGING THE PAPER SIZE IN PAPER TRAY 3 - TRAY 4 To change the paper size of tray 3 - tray 4, follow the steps below. This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading paper, see "LOADING PAPER IN PAPER TRAY 3 - TRAY 4" (page 1-32). Tray 3 Tray 4 Remove the paper size guide. With the base of the tray pressed all the way down, hold down the hook at the bottom on the paper size guide and pull the paper size guide up slightly. 1 Hook Paper guide • Do not place heavy objects on the tray or press down on the tray. • Before changing the paper size of tray 1, raise the paper guide. (A) LT A4 2 Adjust the paper size guide to the paper (B) size to be used. Paper sizes are inscribed at the slot (A) on the bottom of the A4 tray and at the hole (B) at the top of the paper size guide. ("LT" LT indicates 8-1/2" x 11" size.) Align the bottom of the paper size guide with the slot, and align the hole at the top with the locking tab. • When attaching the paper size guide, make sure that the top and bottom of the guide are aligned to the same paper size. • If the top and bottom of the paper size guide are not aligned to the same paper size, skewed feeding and misfeeds will result. 1-33 Contents