Sharp MX-M464N Operating Guide - Page 46

INTERIOR BEFORE USING THE MACHINE (1) (2) (3) (4) (5) (6) (7) (8) (9) (1) Toner cartridges This cartridge contains toner. When the toner in a cartridge runs out, replace with new one. + REPLACING THE TONER CARTRIDGE (page 1-75) (2) Fusing unit Heat is applied here to fuse the transferred image onto the paper. Caution The fusing unit is hot. Take care not to burn yourself when removing a paper misfeed. (3) Photoconductive drum Images are formed on the photoconductive drum. Do not touch or damage the photoconductive drum. This may cause a defective image. (4) Right side cover Open this cover to remove a misfeed. (5) Paper reversing section cover This is used when 2-sided printing is performed. Open this cover to remove a paper misfeed. (6) Bypass tray Use this tray to feed paper manually. When loading a large sheet of paper, be sure to pull out the bypass tray extension. + LOADING PAPER IN THE BYPASS TRAY (page 1-37) (10) (11) (12) (13) (7) Main power switch This is used to power on the machine. When using the fax or Internet fax functions, keep this switch in the "on" position. + TURNING THE POWER ON AND OFF (page 1-15) (8) Toner collection container This collects excess toner that remains after printing. + REPLACING THE TONER COLLECTION CONTAINER (page 1-77) Your service technician will collect the toner collection container. (9) Toner collection container release lever Move this lever when you need to release the toner collection container lock to replace the toner collection container or clean the laser unit. + REPLACING THE TONER COLLECTION CONTAINER (page 1-77) (10) Handle Pull this out and grasp it when moving the machine. (11) Right cover of paper drawer (when a paper drawer is installed) Open this to remove a paper misfeed in tray 2, tray 3 or tray 4. (12) Paper tray right side cover Open this to remove a paper misfeed in tray 1. (13) Right side cover release lever To remove a paper misfeed, pull and hold this lever up to open the right side cover. 1-5 Contents