Sharp PG-D120U PG-D120U Operation Manual - Page 12
Bracket, AN-EP101P Extension Tube.
UPC - 074000347502
View all Sharp PG-D120U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Example of a standard setup ¡ w ¡ w TOP VIEW 90° Lens center SIDE VIEW Lens center 90° The projector lens should be centered in the middle of the screen. If the projector and screen are not centered properly, the picture will be distorted, making viewing difficult. sUsing the horizontal reverse function makes the following setups possible. Example of a reversed image setup • By placing a mirror (normal flat type) in front of the lens and using the horizontal reverse function, the image reflected from the mirror can be projected onto the screen. • Rear projection with a rear projection screen is also possible when using the horizontal reverse function. AUDIENCE SIDE 90° Mirror The projector lens should be centered in the middle of the screen. Rear Projection If the projector and screen are not centered properly, the picture will be distorted, making viewing difficult. Example of a ceiling-mount setup Before mounting the projector, be sure to contact your nearest Authorized Sharp Industrial LCD Products Dealer to obtain the manufacturer recommended ceiling mount bracket (sold separately). (AN-XGCM10 Ceiling Mount Bracket, AN-EP101P Extension Tube). TOP VIEW Upper edge of screen (white portion) SIDE VIEW ¡ ¡ Lens center Lens center • If the relative positions of the projector and the screen are not properly adjusted, the picture will be distorted. E-12