Sharp PG-D120U PG-D120U Operation Manual - Page 23

Adjusting the Picture • This projector's picture is factory preset to standard settings. However, you can adjust it to suit your own preferences with the ADJUSTMENT buttons on the projector and the remote control. • The adjustments can be memorized in RGB or VIDEO separately. • Four picture modes can be adjusted: "PICTURE," "BRIGHT," "RED," and "BLUE." Adjusting the Picture 1 On-Screen Display RGB ADJ. RGB INPUT ADJ. IMAGE ADJ. AUDIO SYSTEM SETUP LANGUAGE 1. Use the MENU button to select the mode to be adjusted. • When the MENU button is pressed, the MENU mode is indicated for about 30 seconds. Press the ADJUSTMENT / buttons to select "RGB ADJ.," then press the ENTER button. :SEL. ENTER : N E X T MENU : E N D 2 RGB ADJ. PICTURE 0- + BRIGHT 0- + RED 0- + BLUE 0- + RESET MEMORY SELECT :SEL. :ADJ. ENTER : N E X T MENU : E N D 3 PICTURE 0- + :SEL. :ADJ. ENTER : E N T E R MENU : E N D 2. Adjust the Picture • Press the ADJUSTMENT / buttons to highlight the picture adjustment item you want to adjust yellow. • Press the ADJUSTMENT / buttons to move the " " mark of the selected adjustment item to the desired setting. • The adjustment mode is displayed for about 30 seconds. Description of Adjustment Items Selected item ADJUSTMENT button ADJUSTMENT button PICTURE For less contrast For more contrast BRIGHT For less brightness For more brightness RED For weaker red For stronger red BLUE For weaker blue For stronger blue COLOR For less color intensity For more color intensity TINT Skin tones become purplish Skin tones become greenish SHARPNESS For less sharpness For more sharpness RESET All RGB Video Adjustment items are returned to the factory preset settings. Note: To reset all adjustment items, select RESET in "RGB ADJ. " mode and press ENTER button. 3. Display Only the Item to Adjust • Press the ADJUSTMENT / buttons to highlight the picture adjustment item you want to adjust yellow. If you press ENTER at this time, only the selected item will be displayed. • Press the ADJUSTMENT / buttons to move the " " mark of the selected adjustment item to the desired setting. • The adjustment mode is displayed for about 30 seconds. Notes: • When a VIDEO signal input has been selected, only "PICTURE," "BRIGHT," "COLOR," "TINT" and "SHARPNESS" can be adjusted. • TINT only appears in NTSC mode. 4. Press the MENU button anytime to exit RGB ADJ. E-23