Sharp SR3U Operation Manual - Page 35

Recording to DVD 4 Press Number buttons or CHAN- NEL ' / " to select the channel to record. 5 Press REC MODE to select the desired recording mode. • The recording mode changes as shown below each time the button is pressed. FINE SP LP EP MNgg • Recording mode set when "MNgg" is selected is the recording mode set on the "MANUAL REC. MODE" Select screen (page 36). 6 Press ● REC. • Recording begins and REC icon is displayed. • The REC indicator on the front of the Recorder is lit red during recording. DVD-RW REC VR ORIG IN AL F I NE REMAIN 1h0m 1/1 1/1 00 : 00 : 01 7 Press STILL/PAUSE to pause recording. • Pause will not function during timer recording. • The REC indicator on the front of the Recorder blinks during Recording Pause mode. 8 Press STILL/PAUSE to resume recording. 9 Press ■STOP to stop recording. • "DATA IS BEING RECORDED TO DISC." displays on TV screen and recording stops. • Stop recording first when you take out the disc. NOTE • Press ON SCREEN (under the cover) to confirm remaining time of DVD or check the counter display during recording. • You cannot record programs which prohibit recording. • Recording either stops or pauses automatically in the following cases. -Program which prohibits recording is on air. -Unable to continue recording for some reason. • Timer recording cannot be performed during direct recording. To perform timer recording, stop direct recording before the preset start time for timer recording. You may not be able to record on disc edited by other recorder. • If a disc edited by other DVD recorder has more than 999 chapter marks, it cannot be edited (or recorded) with this Recorder. • If a disc edited by other DVD recorder has added or erased scenes 51 times or more per title or the disc is protected, it cannot be edited (or recorded) with this Recorder. About Recording to DVD in Video Mode • In case you are recording to DVD in Video mode and recording stops due to power failure etc., recorded contents a few minutes before the stop may not be recorded. Inserting Chapter Marks Manually during Recording Press CHAPTER MARK (under the cover). • "RECORDED CHAPTER MARK." displays and chapter mark is recorded. • You can only record chapter marks manually when recording to DVD-RW (VR mode). • You cannot record chapter marks manually when recording to DVD-RW (Video mode) or DVD-R. Setting the Record End Time during Direct Recording (Simple Recording Timer) DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE 1 Press Æ REC on the remote control during recording. • The Record End Time Setting screen is displayed. 2 Press ' / " to set the end time. • The end time can be set in units of 15 minutes. • Total recording time cannot exceed 6 hours so the end time has to be set accordingly. • Press EXIT to stop setting midway through. SET STOP TIME. STOP TIME 10 : 30 PM SELECT ENTER ENTER 3 Press SET/ENTER. • The record end time is set, and the clock mark lights up on the front display panel. 35