Sharp SR3U Operation Manual - Page 75
Recording from External Equipment
![]() |
UPC - 074000354371
View all Sharp SR3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Recording from External Equipment Recording from a Camcorder (VCR) Using an Analog Connection DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE Material from a camcorder can be recorded with this Recorder using an analog connection. You can capture video by connecting a camcorder or VCR to the LINE IN 1, 2 or 3 jacks of this Recorder. NOTE • More vivid images can be viewed by connecting the S- VIDEO IN jack on this Recorder with the S-video Out jack on the camcorder using an S-video cable. • Some camcorders may be required to be connected using a special cable. • Refer to the operation manual provided with the camcorder for further information on the procedure for connecting the camcorder. • Material protected with a copy guard cannot be recorded. It may be impossible to get the correct video, even if you just view without recording. • Date and time as well as the contents of cassette memory cannot be recorded with this Recorder. • If you input video from an external device to this Recorder, there will be a slight difference in image quality between the video viewed from the external device directly on the TV, and video viewed as external input to the Recorder. Example: To record by connecting a camcorder to the LINE IN 3 jacks. The Recorder 1 Select audio to be input from the external equipment. • Select audio using "EXTERNAL AUDIO" (page 76). • Select "L CH" or "R CH" with "DUAL MONO REC. SET" (page 76) to record in Video mode. 2 Press INPUT to set the connection to exter- nal input channel (example: L3). • The setting will cycle as follows each time you press the button. L1 (IN 1) L2 (IN 2) TV channels L3 (IN 3) 3 Play back the camcorder or VCR. 4 Press ●REC when you reach the scene you want to start recording. • The Recorder starts recording. 5 Press STILL/PAUSE when you want to pause recording. • Press STILL/PAUSE again to cancel Pause mode. 6 Press ■STOP when you want to stop (end) recording. RESET S-VIDEO VIDEO L (MONO)-AUDIO-R LINE IN 3 To S-VIDEO Input jack To VIDEO/AUDIO Input jacks S-video cable (provided with camcorder or commercially available) To S-video output jack Video/audio cable (commercially available) To video/audio output jack Camcorder 75
![](/manual_guide/products/sharp-sr3u-operation-manual-2dbbc72/75.png)