Sharp SR3U Operation Manual - Page 89
On-screen Error Messages
![]() |
UPC - 074000354371
View all Sharp SR3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
On-screen Error Messages Messages Relating to DVD Discs • The following messages appear on the TV screen in case the disc you tried to play back is not appropriate or the operation is not correct. Error message CANNOT PLAY BACK THIS DISC. THIS IS A NON-STANDARD DISC. REGION CODE OF DISC IS WRONG. DISC NOT INSERTED. CANNOT OPERATE THIS FUNCTION. DISC IS PROTECTED. COULD NOT REPAIR THE DISC. COULD NOT FINALIZE. THIS VIDEO IS COPY PROTECTED. RECORDING IS NOT POSSIBLE. Possible Error • The disc cannot be played with this Recorder. • If you load a disc which cannot be played with this Recorder (i.e. a scratched disc), or if you load a disc upside down, this message will appear, and the disc tray will automatically pop out. • Occurs if you load a DVD disc whose region number is not "ALL" or whose region number does not contain "1". • Occurs if no disc is loaded in the disc tray. • Occurs if operation is incorrect. • Occurs if you attempt to record or edit a disc for which disc protection is set. • If there is a power failure during DVD recording, the system automatically tries to recover data after power is restored. This error occurs if such recovery is impossible. • Occurs if the disc is scratched or dirty, etc. • Occurs if video with a copy guard signal is input. Suggested Solution • Check the disc, and load it correctly. • Cancel disc protection, or reload a recordable disc. • Check the disc, and load it correctly. • Cannot record. CANNOT RECORD MORE. CANNOT RECORD ON THIS DISC. COULD NOT INITIALIZE. DISC IS FULL. CANNOT RECORD OR STORE. CANNOT RECORD VIDEO TO THIS DISC. SET THE DATE AND TIME. • Occurs if a title or chapter mark exceeds the recordable upper limit. • Number of titles: 99. Number of chapters: 999 • Occurs if you load a disc which cannot be recorded to with this Recorder, or a disc which is scratched or dirty. • Occurs if the disc is scratched or dirty, etc. • Occurs if there is no empty space in the disc. • Occurs if you try to record a "Copy Once" broadcast onto a disc which is not compatible with CPRM. • Occurs if timer programming is done when the Recorder clock has not been set. • Erase unnecessary titles. • Either erase unnecessary chapters, or combine chapters. • Reload an appropriate recording disc. • Check the disc, and load it correctly. • Load a disc with empty space. • Erase unnecessary titles. • Load a CPRM compatible disc (DVD-RW Ver. 1.1 or higher) initialized in VR mode. • Set the clock and perform timer programming again. Continued on Next Page ||| 89
![](/manual_guide/products/sharp-sr3u-operation-manual-2dbbc72/89.png)