Sharp SR3U Operation Manual - Page 81

Function Setting ADJUSTMENT VIDEO/ AUDIO SETTING DD OUTPUT LEVEL • This lets you adjust the range between the loudest and softest sound NO (dynamic range), and play back at the average volume. Use this YES when it is hard to hear dialog. NO: This outputs recorded audio as is. YES*: This raises the average volume when playing back Dolby Digital audio so that the volume sounds the same as an audio CD. (If the audio sounds abnormal, set to "NO".) * Lower the volume before setting. If you do not do so, the speaker may emit a loud sound, or excessive input may be applied to the speaker. 3D Y/C SEPARATION • This setting enables cleaner viewing and recording of TV broadcasts, YES and video from equipment connected to external input jacks (terminals). NO YES: This enables recording with higher picture quality. (Normally this is set to "YES".) NO: Set this to "NO" if the picture looks abnormal when receiving a weak broadcast signal, or when the picture is disturbed because you have connected VCR or game equipment to the external input terminals of the Re- corder. DNR (DIGITAL NOISE REDUCTION) • This lets you reduce noise for an easier to view picture when noise in ON the played back image is bothering you. It is recommended to set this OFF to "ON" when playing back video recorded in long play modes like LP mode or EP mode, and to "OFF" when playing back discs with little noise (like DVD video). CHANNEL PRESET SELECT RECEPTION TYPE • This sets the type of TV broadcast received (AIR or CATV). AIR CATV SELECT CHANNEL PRESET METHOD • This sets whether to perform channel setting automatically or manually. AUTO MANUAL OPTION SEAMLESS PLAYBACK SETTING • This setting is for smoother playback of the transitions between YES scenes when you have edited an original title or play list. (The NO transition point may shift about one second.) Continued on Next Page ||| 81