Sharp SR3U Operation Manual - Page 46

Eliminating Problems (Recording, Timer Recording) When You Cannot Record Problem • No disc in the Recorder. • Unrecordable disc is loaded. • Not enough disc capacity. • Recorder cannot identify the disc. • Disc is protected. When You Cannot Timer Record Problem • No disc in the Recorder. • Unrecordable disc is loaded. • Not enough disc capacity. • Recorder cannot identify the disc. • Disc is protected. • Number of timer programs set has reached the limit. • Playing back the DVD. • In the middle of direct recording. Suggested Solution • Load recordable DVD. • Load recordable DVD with enough capacity. • Cancel disc protection or change to new recordable DVD for recording. Suggested Solution • Load recordable DVD. • Load recordable DVD with enough capacity. • Cancel disc protection or change to new recordable DVD for recording. • Erase unnecessary timer programs. • Stop playing back the DVD more than 3 minutes before timer recording starts. If you don't stop playback until timer recording start time, timer recording will not start. • Timer recording does not function during direct recording. Stop direct recording before the preset start time for timer recording. NOTE • If you set multiple timers, and the programmed times overlap, or the end time of the previous timer is the same as the start time of the next timer, timer recording will begin after the preceding timer recording finishes. There will be a delay of up to 1 minute before the next timer recording begins. 46