Sharp SR3U Operation Manual - Page 67

Editing an Original Title Erasing All Titles DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE This erases the entire contents of a DVD-RW. (Except titles for which title protect has been set.) You can erase the following: • ORIGINAL: Erases all titles recorded on DVD. When originals are erased, play lists are also erased. • PLAY LIST: Erases all play lists created on DVD. Even if play lists are erased, the original titles are not erased. NOTE • When a Video mode disc is finalized, you can no longer erase all titles. 1 Select "EDIT/ERASE" in START MENU screen, then press SET/ ENTER. 2 Press ' / " to select "ERASE ALL TITLES", then press SET/ ENTER. 3 Press ' / " to select what you want to erase, then press SET/ ENTER. ERASE ALL TITLES 12 / 25 SAT 10 : 28 AM SELECT AN ITEM BELOW TO ERASE ALL TITLES ORIGINAL PLAYLIST 4 Press \ / | to select "YES", then press SET/ENTER. • Carefully confirm before executing erase. • If you select "NO" and enter, the screen in step 3 appears. 5 Press SET/ENTER. • All titles (or play lists) are erased, and the screen in step 3 appears. To restore the erased content, press Green (C) (CNL ERSE). Operate according to the instructions on the screen. (Note: You can only undo once, to the state immediately before the last erase.) 6 Press EXIT to exit from Edit mode. Erasing by Selecting a Title (or Chapter) DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE Allows you to select titles to erase, and erase them in a batch. • When erasing original titles: If original titles are erased, those titles will also be erased from play lists. • When erasing play lists: Even if play lists are erased, the original titles will not be erased. NOTE • Up to a maximum of 20 titles (chapters) can be selected at one time. • When a Video mode disc is finalized, you can no longer select and erase titles. • You cannot erase chapters in DVD-RW/R discs (Video mode). 1 Select "EDIT/ERASE" in START MENU screen, then press SET/ ENTER. 2 Press ' / " to select "ERASE TITLES", then press SET/ENTER. 3 Press to select titles to erase. • If you press Red (B) (CHAPTER), the screen will switch to the chapter thumbnail display so you can select and erase chapters. 4 Press SET/ENTER. • If there are other titles (chapters) you wish to erase, select with and press SET/ENTER. 5 Press Yellow (D) (ERASE). 6 Press \ / | to select "YES". • Once a title (chapter) has been erased, it cannot be restored. Carefully confirm before executing erase. • If you select "NO" and enter, operate form step 4 again. 7 Press SET/ENTER. • All selected titles (chapters) are erased. • To cancel erase, press Green (C) (CNL ERSE). • Operate according to the instructions on the screen. 8 Press EXIT to exit from Edit mode. Continued on Next Page ||| 67