Sharp XEA102 Instruction Manual - Page 28

Maintenance Before Calling for Service If you encounter a problem, use this chart before calling for service. Problem • The display shows symbols that do not make sense. Item to check • Was the machine reset in the proper way shown on page 5? • The display will not illuminate even when the mode switch is not set to " ". The machine fails to operate when any key is pressed. • Is the power supplied to the electrical outlet? (Plug in another electrical device.) • Is the power cord firmly connected to the electrical outlet? • The display is illuminated, but the machine does not accept key entries. • Is the mode switch properly set to the REG position? • Was the machine reset in the proper way shown on page 5? • Journal paper does not feed properly in • Is the take-up spool installed properly? the printer. • Is there a paper jam? • Printing is faded or illegible. • Isn't the ink roller used up? • Is the ink roller installed properly? Specifications Model: XE-A102 Size: 330(W) x 363(D) x 234(H) millimeters Weight: 5 kg Power Source: Official (nominal) voltage and frequency Power Consumption: Stand-by: 6.4 W Operating: 13 W Work Temperature: 0 to 40 °C Display: LED (Light-Emitting Diode) numeric display Printer: 1 station print wheel selective type Printing Capacity: Max. 13 digits Paper Roll: Width: 57.5 mm ± 0.5 mm Max. diameter: 80 mm Paper quality: Bond paper (thickness: 0.06 to 0.085 mm, weight: 47 to 64 g/m2) Cash Drawer: 3 slots for bills, 6 for coins Accessories (supplied):Paper roll Mode key Drawer lock key Instruction manual Quick start guide Ink roller Take-up spool Fixing angle blacket Paper holding plate 1 roll 2 2 1 copy (this manual) 1 copy 1 (already installed) 1 1 1 * Specifications and appearance are subject to change without notice. 26