Sharp XL-S10 XL-S10 Operation Manual - Page 18
Listening to the radio - stereo system
View all Sharp XL-S10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Radio XL-S10 Listening to the radio 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button until "FM" or "AM" appears on the display. When operating with the remote control, press the TUNER (BAND) button to select "FM" or "AM". 3 Press the TUNING ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes: ! When radio interference occurs, auto scan tuning may stop automatically at that point. ! Auto scan tuning will skip weak signal stations. ! To stop the auto tuning, press the TUNING button again. To receive an FM stereo transmission: Press the FUNCTION (TUNER (BAND)) button to display the "ST" indicator. ! " " will appear when an FM broadcast is in stereo. ! If the FM reception is weak, press the FUNCTION (TUNER (BAND)) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. After use: Press the ON/STAND-BY button to enter the power stand-by mode. FM stereo mode indicator FM stereo receiving indicator 18