Sharp XL-S10 XL-S10 Operation Manual - Page 24

XL-S10 Timer and sleep operation (continued) 7 When the preset time is reached, playback will start. The volume will increase gradually until it reaches the volume you were listening at before your system enters the timer standby mode. 8 The unit will enter the stand-by mode one hour after the timer playback starts. However, when CD playing time is one hour or less, it will enter the stand-by mode after completing playback. To reset or change the timer setting: Perform "Timer playback" from the beginning. " Sleep operation 1 Play back the desired sound source. 2 Press the SLEEP button. To cancel the sleep operation: Press the ON/STAND-BY button while "SLEEP" is indicated. To cancel the sleep operation without setting the system to the stand-by mode, press the SLEEP button until "OFF" appears on the display. To confirm the remaining sleep time: Press the SLEEP button once while the sleep timer is set. The remaining sleep time is displayed for about 5 seconds. " To use timer and sleep operation together Example: To fall asleep and wake up to the same radio station You can play back the same source only (the function cannot be switched). 1 Set the sleep time (steps 1 - 2, page 24). 2 While the sleep timer is set, set the timer playback start time (steps 4 - 6, page 23). Advanced Features To change the sleep time: Press the SLEEP button repeatedly to select the desired sleep time. The time will decrease as follows. The amount of sleep time can also be changed while in the sleep mode. 3:00 2:00 1:30 1:00 OFF 5 10 15 30 3 Your system will enter the power stand-by mode automat- ically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. 1.Sleep timer setting 2.Timer playback setting 5 minutes - 3 hours Sleep operation will Timer playback automatically stop. start time 24