Sharp XL-S10 XL-S10 Operation Manual - Page 22

XL-S10 Recording to a cassette tape (continued) " Recording from the radio 1 Tune in to the desired station (see page 18). 2 Load a cassette into the cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 Press the button. 4 Press the button, which also en- gages the button. 5 Press the button again to begin recording. To stop recording: Press the button. Note: If you hear a whistling noise while recording an AM station, move the AM loop antenna. " Erasing a recorded tape 1. Load the tape to be erased into the cassette compartment with the side to be erased facing toward you. 2. Press the FUNCTION button until "TAPE" appears on the display. 3. Press the button which also engages the button to begin erasing. Erase-prevention tabs of cassette tapes: ! When recording on a cassette tape, make sure that the eraseprevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. Side A ! To protect the recorded sound, remove the tab after recording. Cover the tab hole with the adhesive tape to record on the tape without the tab. Tab for side B Tab for side A Tape Recording 22