Sharp XL-S10 XL-S10 Operation Manual - Page 30

XL-S10 References Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. " General Power source Power consumption Dimensions Weight AC 120 V, 60 Hz 28 W Width: 6-5/16" (160 mm) Height: 9-1/2" (242 mm) Depth: 9-7/8" (250 mm) 5.1 lbs. (2.3 kg) " Amplifier Output power Output terminals Input terminals 5 watts minimum RMS per channel into 4 ohms from 100 Hz to 15 kHz, 10% total harmonic distortion Speakers: 4 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Subwoofer pre-out (audio signal): 500 mV/47 k ohms Video/Auxiliary (audio signal): 500 mV/47 k ohms " Tuner Frequency range FM: 87.5 - 108.0 MHz AM: 530 - 1,720 kHz " CD player Type Signal readout D/A converter Frequency response Dynamic range Compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz 90 dB (1 kHz) " Cassette deck Frequency response 125 - 8,000 Hz (normal tape) Signal/noise ratio 50 dB (recording/playback) Wow and flutter 0.3 % (WRMS) " Speaker Type Maximum input power Rated input power Impedance Dimensions Weight 4" (10 cm) full-range speaker (magnetically shielded) 10 W 5 W 4 ohms Width: 5-1/8" (130 mm) Height: 9-7/16" (240 mm) Depth: 6-5/16" (161 mm) 3.3 lbs. (1.5 kg)/each 30