Sharp XL-S10 XL-S10 Operation Manual - Page 23

Timer and sleep operation This may be operated only with the remote control. Timer playback: The unit turns on and plays the desired source (CD, tuner) at the preset time. Sleep operation: The radio and compact disc can all be turned off automatically. Note: The timer and sleep operations are not available during the tape mode. Before setting timer: 1 Press the CLOCK button to check that the clock is set to the correct time. 2 Load a disc to be played. " Timer playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD or TUNER (BAND) button to select the de- sired function. If you select TUNER (BAND), tune in to the desired station. 3 Adjust the volume using the VOLUME buttons. Do not turn the volume up too high. 4 Press the TIMER button and within 6 seconds, press the MEMORY button. 5 Within 1 minute, press the PRESET ( or ) button to specify the hour to start, then press the MEMORY button. XL-S10 Advanced Features 6 Within 1 minute, press the PRESET ( or ) button to specify the minutes to start, then press the MEMORY button. ! The timer playback starting time, function, and volume will be displayed, and then the unit will enter the stand-by mode automatically. ! " " will light up and the current time will be displayed. To cancel the timer playback: Press the ON/STAND-BY button to turn the power on. Continued to the next page 23